Loading the material
Heavy-duty rubber conveyor
The rubber conveyor, covered to limit the dispersion of toner dust, has a smooth belt with a scraper for cleaning at the discharge point.
Toner Cartridge Treatment Plant
CAMEC has developed a dedicated system for the correct shredding of spent toner cartridges which, as such, cannot normally be disposed of as municipal solid waste.
Description
Dedicated shredding for spent toner cartridges
Since spent toner cartridges, as printing consumables, are considered waste not assimilable to other types, CAMEC has developed dedicated plants for this material.
The first processing stage is carried out by a TR4A350/10 quad-shaft shredder with a Ø30 wear-resistant steel screen, facilitating the separation of dust and metals in the subsequent process steps; the pre-arrangement for a nitrogen inerting system in the shredding chamber prevents dust-related hazards.
Filtered dust, material ready for reuse
The dust is processed and extracted via an open-execution vibrating screen and sent to the filter, ready for subsequent reuse.
- TR4A350/10 quad-shaft shredder with Ø30 wear-resistant steel screen
- Pre-arrangement for a nitrogen inerting system in the shredding chamber
- Open-execution vibrating screen for dust/fragment separation
- Permanent-magnet ferrous removal drum
- Eddy Current Separator for non-ferrous metals
- Dedicated filtration and extraction system
Versatility without compromise
Paper and Cardboard Plant
CAMEC plants dedicated to paper and cardboard are specifically designed to handle a highly abrasive material that requires very powerful machines and wear-resistant tools.
- Continuous metering of the material up to 10 t/h
- Rubber-faced metal tapes conveyor for a constant feed
- Self-cleaning anti-wrap drum, zero jamming
- Rotary screen with high wear resistance
- Manual sorting cabin to refine separation
- Automatic configuration available, with optical sorter for qualitative paper separation
Find out more
Copper Cable Plant
CAMEC designs and builds turnkey plants, fully customised, for shredding electric cables and separating their component materials, with a process aimed at maximum copper recovery.
- Double shredding (GSR480 single-shaft shredder + MG800 granulator) for progressive, controlled reduction
- Ferrous separation via overband separator between the shredding stages
- Pneumatic conveying with TBR horizontal turbine, quick-opening for maintenance
- Dry copper/insulation separation with densimetric tables
- Recovered copper purity of up to 98%
- Fully customisable plant, built to the customer's specifications
Find out more
RDF-SRF Plant
The CAMEC plant for RDF/SRF is designed to transform industrial, domestic and commercial waste into alternative fuels: RDF (Refuse-Derived Fuel) and SRF (Solid Recovered Fuel).
- Independent dual-sector disk screen
- Air Separator for the removal of non-shreddable bodies
- Secondary shredding with GS650/25 single-shaft shredder and Ø30 screen
- Ferrous removal and Eddy Current Separation of metals
- Dedicated dust extraction system for process dust
- RDF and SRF ready for cement plants, power plants and waste-to-energy facilities
Find out more