Loading and pre-sorting
Loading and sorting conveyor
The conveyor feeds the incoming material and allows for pre-sorting, preparing it for the following treatment stages.
Sneakers Plant
This special CAMEC plant allows clean rubber to be obtained from end-of-life sports footwear, which can be reused and reprocessed within the circular economy.
Description
Shredding and ferrous removal in a single cycle
The CAMEC plant performs an initial shredding stage with the GRR280 single-shaft shredder, with hydraulically driven radial pusher, which reduces the material's size via a rotor fitted with interchangeable, wear-resistant cutters; the interchangeable-section screen regulates the output particle size. Ferrous removal then follows, along with the pass through the Eddy Current Separator. The second shredding stage, with the MG400 granulator, achieves a particle size of 10 mm.
Clean rubber, ready for the circular economy
Finally, a zigzag air separator and a densimetric table are used to obtain clean rubber free of textile components, which can be reused and reprocessed within the circular economy.
- GRR280 single-shaft shredder for primary shredding
- Double ferrous removal (magnetic separator + magnetic pulley)
- Eddy Current Separator for the recovery of non-ferrous metals
- MG400 granulator, particle size down to 10 mm
- Zigzag air separator and densimetric table for density classification
- Automatic big bag filling with dual continuous discharge system
Video
Versatility without compromise
Paper and Cardboard Plant
CAMEC plants dedicated to paper and cardboard are specifically designed to handle a highly abrasive material that requires very powerful machines and wear-resistant tools.
- Continuous metering of the material up to 10 t/h
- Rubber-faced metal tapes conveyor for a constant feed
- Self-cleaning anti-wrap drum, zero jamming
- Rotary screen with high wear resistance
- Manual sorting cabin to refine separation
- Automatic configuration available, with optical sorter for qualitative paper separation
Find out more
Copper Cable Plant
CAMEC designs and builds turnkey plants, fully customised, for shredding electric cables and separating their component materials, with a process aimed at maximum copper recovery.
- Double shredding (GSR480 single-shaft shredder + MG800 granulator) for progressive, controlled reduction
- Ferrous separation via overband separator between the shredding stages
- Pneumatic conveying with TBR horizontal turbine, quick-opening for maintenance
- Dry copper/insulation separation with densimetric tables
- Recovered copper purity of up to 98%
- Fully customisable plant, built to the customer's specifications
Find out more
RDF-SRF Plant
The CAMEC plant for RDF/SRF is designed to transform industrial, domestic and commercial waste into alternative fuels: RDF (Refuse-Derived Fuel) and SRF (Solid Recovered Fuel).
- Independent dual-sector disk screen
- Air Separator for the removal of non-shreddable bodies
- Secondary shredding with GS650/25 single-shaft shredder and Ø30 screen
- Ferrous removal and Eddy Current Separation of metals
- Dedicated dust extraction system for process dust
- RDF and SRF ready for cement plants, power plants and waste-to-energy facilities
Find out more